When a campus asks “how can we use our campus ID cards to track attendance with CollegiateLink,” there are several variables that need to be considered. We’ve designed a number of functions within CollegiateLink that are easy to use but robust enough to work with any type of campus ID card or hardware swiping device so that campuses can successfully track attendance at events.
The process of an ID card attendance tracking program with CollegiateLink includes the following steps: purchasing equipment, system configuration, data collection, reporting, and assessment creation (using Campus Labs Baseline).
The first decision for a campus in designing an ID card tracking system is what type of card reader appliance is the best fit for the program. At its most basic level, a card reader identifies information contained on the magnetic strip or barcode of the ID card and then records that information in a file (in CollegiateLink, on a computer program, or on the on-board memory of the appliance).
The piece of data that should be collected is the unique identifier of the card (typically a number string of 5-9 characters). Magnetic strips typically have 3 tracks, or areas of information, it is important to know which track the unique ID number is on before purchasing a card reader appliance so that you are sure the appliance can read the appropriate track.
If you intend to use CollegiateLink's live card-swiping interface, you must ensure that your device meets the following criteria:
- Device provides keyboard emulation. You will know if a device provides keyboard emulation if you connect it to a computer, open any text editing application such as Notepad, and then swipe or scan a card ID; if information from the card appears in the text editor, then the device is likely working through keyboard emulation. Devices are often also available as being HID-compliant instead of providing keyboard emulation. HID-based devices may still work and act as described in the example above, but often require additional software or drivers to be installed on the computer to which the device is connected.
- Device inserts carriage returns (i.e., the "enter" key) after each swipe or scan. Some devices do not insert carriage returns by default, but can be configured to do so. Please consult with the device hardware vendor for more information. Note: it is not explicitly required that your device insert carriage returns after each swipe--if it doesn't, you can always hit the "enter" key manually or press the submit button on the card ID entry screen.
- No encryption: The device should not encrypt card data. This function is typically reserved for devices that process credit card information (i.e. Square Readers).
Campus Labs does not explicitly endorse any vendor, specific brand, or hardware model. The following list of vendors and descriptions of hardware types are based on information gathered from campuses who use CollegiateLink and have collected card ID data for event attendance tracking purpose.
Magnetic Card Swipe Readers
|MSR90 Card Swipe Reader||Wired (USB)||PC/Mac||$19|
|MagTek Mini Swipe - USB Keyboard Emulation||Wired (USB)||PC/Mac||$47|
Summary: These plug and play devices are extremely easy to use. The MagTek reader has been the most popular device used with card swipe but the cheaper option serves the same purpose for a fraction of the cost.
Bar Code Scanners
Summary: This device is extremely easy to use and the price is right. Just plug in the USB receiver to a computer and you can swipe users in real time within a fifteen to twenty foot range. If you need to travel farther than this range, switch to inventory mode and the device will start saving each scan. You can then output the data into a spreadsheet and upload it to an event.
After you acquire a device, complete the following steps to ensure Campus Labs has the necessary data to effectively use the card swipe system.
- Send test swipes: Using your new device, swipe or scan several test cards into an email then send it along to the support team. Be sure to identify the unique ID in each string. This will allow us to write an expression into CollegiateLink that isolates the ID number and ties it to the correct user account.
- Load unique card identifier: In order for CollegiateLink to understand the data that is collected and associate it with users the system first needs to be configured to identify the specific unique information that is contained on the magnetic stripe or barcode of an ID card. To set up the CollegiateLink system there are two options to discuss with a campus support specialist.
- Passing each user's card ID information into the CollegiateLink database when they login.
- Uploading a master list of card ID information into the database at periodic intervals which associates the card ID information with user information in CollegiateLink.
The primary piece of information that CollegiateLink needs to understand card information is the format of the information that is provided on a card and the specific piece of the string that is recognized as an identifying piece of information.
For example a full set of data on a mag strip may look like this:
And the identifying piece of data is the campus card # which in this example is represented by:
Once CollegiateLink understands the format of a swipe/scan and which piece of it that it should recognize the system is configured.
Using your selected card reader collect the unique ID information contained on your campus cards. For simplicity and ease of use it is important to only collect 1 unique ID number per person who is attending. There are two options for collecting this information:
- In real-time using CollegiateLink swipe interface
- By collecting the data into a .csv file that can then be uploaded into CollegiateLink via the “Track Attendance” section the event information. Upon upload the attendance data will be associated with the correct user information.
Once the data has been uploaded into CollegiateLink simple attendance information, as well as the ability to comment on those who attended is instantly available via the “track attendance” area of the system, this information can also be exported as .csv files via the administrative area of the system.
If your campus is also a Baseline member a panel can be created in order to pull demographic data and generate a recipient list for assessment activities by contacting your Campus Labs Assessment Consultant.